Bob, I have edited the registry (found dozens of keys left by IP), but still
no joy. I still cannot reinstall the 1270. Before the IP demo the Epson
driver worked OK, after I can't reinstall = I would say IP is removed from
the equation for purchase consideration.
Regards,
--Ken Carney
www.kencarney.com
-----Original Message-----
From: Bob Frost [mailto:bobfrost@...]
Sent: Tuesday, October 21, 2003 8:18 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] Epson install problem after ImagePrint
Ken,
Something else I read was that installation of the IP driver would uncheck
the port of the Epson 1270 driver (USB or LPT1?) and put the printer on
'Pause'. So you would have to recheck the port of the 1270, untick Pause,
and recheck printer spooling and possibly bidirectional support to get the
1270 running again if it had already been installed, but if it has stopped a
fresh installation of your 1270 from working??? I had no problem in getting
my 2100 working again after uninstalling IP, or simply going back to using
the Epson driver while IP is still installed, providing I went into
Settings/Printers/Properties and rechecked all the normal Epson printer
settings. I might try installing my 2100 twice under two different names (eg
Epson 2100 and IP 2100) and let IP interfere with one and see if I can still
use the other normally.
I do like the look of the new 4000 though. It would save me having to find a
way of refilling the 2100 cartridges from some 7600 cartridges, allow
instant swapping of photo black and matte black, and if the profiles are
good enough, we might not need IP!! Hang on to your money 'till January.
Bob Frost.
----- Original Message -----
From: "Ken Carney" <kcarney1@...>
> Bob, in haste I overlooked the port. I could not find the port you
> described in Windows Explorer, but when I checked the ports for the 1270
> using properties in settings/printer, there was a port I had overlooked
> labeled "CB Monitor". It pointed to the address you reference. This is
> getting a little weird, if I may say so. Still, though, despite
everything
> I cannot install the XP software for the 1270. I think (a) off into the
> dreaded registry and (b) downloading the IP demo is a _big_ mistake.
Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.
Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or flames
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/Message
RE: [Digital BW] Epson install problem after ImagePrint
2003-10-23 by Ken Carney
Attachments
- No local attachments were found for this message.