Digital BW, The Print

David,

If you are using a Mac, I don't think the toner curve would be that far  
off to require any adjustment.  Do you get a similar effect with the  
sepia curve (orange)?  Are you sure all of the gray inks are firing  
(nozzle checks OK)?

Carl
On Friday, November 14, 2003, at 08:27  AM, David Wroblewski wrote:

> I've installed the UltraTone carts in my 2200 yesterday,
> and after letting it sit for ~ 5 hours and doing about
> 10 cleaning cycles, I started getting good nozzle checks.
>
> I've installed Carl's 2200 UT curves after commenting
> out the linearization data.
>
> Now, when I print 21Step.tif, using any of the profiles
> that mention toner-curve.raw, the output alternates between
> gray steps and varying levels of blue toner rather than being
> a smooth ramp. (When I print using the warm curve, which
> does not use toner-curve.raw, the output is fine.)
>
> Is this the result of the Mac/IBM bit-order problem in
> toner-curve.raw mentioned in other posts? If so, how do I
> correct that file? The instructions I found were a little
> cryptic, and had to do with opening the gray16 file, not
> the toner-curve.raw file. That confuses me. What program are
> you using to do this correction?
>
> And once corrected, do I need to reprocess the .txt files
> and reinstall the curves?
>
> Thanks,
> David
>
>
> ------------------------ Yahoo! Groups Sponsor  
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the US &  
> Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/ucIolB/TM
> --------------------------------------------------------------------- 
> ~->
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls  
> and other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> If you wish to receive no emails or just a daily digest, or you wish  
> to unsubscribe, please edit your Membership preferences by visiting  
> this same page.
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to  
> keep them short.
> - As the topic of a thread changes remember to change the subject  
> header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the  
> various resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to  
> http://docs.yahoo.com/info/terms/
>
>