Whoops, I should have specified that I was on Linux. Sorry about that. Roger sent me the toner-curve.raw that has the IBM bit order and that solved the problem. Thanks, david --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield <scho@m...> wrote: > David, > > If you are using a Mac, I don't think the toner curve would be that far > off to require any adjustment. Do you get a similar effect with the > sepia curve (orange)? Are you sure all of the gray inks are firing > (nozzle checks OK)? > > Carl > On Friday, November 14, 2003, at 08:27 AM, David Wroblewski wrote: > > > I've installed the UltraTone carts in my 2200 yesterday, > > and after letting it sit for ~ 5 hours and doing about > > 10 cleaning cycles, I started getting good nozzle checks. > > > > I've installed Carl's 2200 UT curves after commenting > > out the linearization data. > > > > Now, when I print 21Step.tif, using any of the profiles > > that mention toner-curve.raw, the output alternates between > > gray steps and varying levels of blue toner rather than being > > a smooth ramp. (When I print using the warm curve, which > > does not use toner-curve.raw, the output is fine.) > > > > Is this the result of the Mac/IBM bit-order problem in > > toner-curve.raw mentioned in other posts? If so, how do I > > correct that file? The instructions I found were a little > > cryptic, and had to do with opening the gray16 file, not > > the toner-curve.raw file. That confuses me. What program are > > you using to do this correction? > > > > And once corrected, do I need to reprocess the .txt files > > and reinstall the curves? > > > > Thanks, > > David > > > > > > ------------------------ Yahoo! Groups Sponsor > > ---------------------~--> > > Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark > > Printer at MyInks.com. Free s/h on orders $50 or more to the US & > > Canada. > > http://www.c1tracking.com/l.asp?cid=5511 > > http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/ucIolB/TM > > ----------------------------------------------------------------- ---- > > ~-> > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls > > and other resources as they are often being updated. The page is at: > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or you wish > > to unsubscribe, please edit your Membership preferences by visiting > > this same page. > > > > Please follow these basic guidelines: > > - Include your full name with your message. > > - Include the address of your website, if you have one. > > - As threads develop, trim off excess portions of earlier messages to > > keep them short. > > - As the topic of a thread changes remember to change the subject > > header. > > - Good manners are required at all time. No personal attacks or flames > > - Complete your Yahoo profile. > > - Before posting a question, search the message archives and the > > various resources on the homepage. > > > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > >
Message
Re: [Digital BW] QTR - grayscale ramp scrambled w/Ultratone curves
2003-11-14 by David Wroblewski
Attachments
- No local attachments were found for this message.