Digital BW, The Print

Paul,
Any chances that these curves will be available for the Epson 1160 or 
is what is available for the 1160 the same as for the 1280 as far as 
taking care of the coolness of the paper?
Cheers,
Andre


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@v...> wrote:
> I have PremierArt curves for the 1280 that takes care of the 
coolness of
> this paper.  (I also have curves for UltraSmooth -- the same paper 
from what
> I can see -- for some other printers).  The dmax was about 1.62 --
> competitive with many cotton papers, but not up to EEM or PhotoRag 
(usually
> about 1.68 & 1.66, respectively, with the 1280 & Eboni).
> 
> A shiny black is usually a sign of over saturated paper, and it will
> actually lower the dmax.  I have not seen with the Epson driver.
> 
> Paul
> http://www.PaulRoark.com
> _________________________________
> 
> -----Original Message-----
> From: sceptre12345 [mailto:am1000@v...]
> Sent: Wednesday, November 19, 2003 3:32 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: Premier paper and UT
> 
> 
> What I've noticed with this paper and the UT inkset is that the dmax
> is a lot lower than with EEM. It prints too cold for my taste.
> 
> The same thing has been noticed on the Piezo list with the Piezo-
> Tones inkset.
> 
> Cheers,
> Andre
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x"
> <px3n120x@y...> wrote:
> > Bought a pack of Premier (Museum) and didn't get satisfactory
> results with UT.
> > The issue is the black which if used over 75% becomes slightly
> shiny.
> > Have others noticed the same problem?
> > This is on a 1280/QTR/CFS system if that makes any diference.
> >
> > Andu
> 
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, 
Polls and
> other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you 
wish to
> unsubscribe, please edit your Membership preferences by visiting 
this same
> page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages 
to keep
> them short.
> - As the topic of a thread changes remember to change the subject 
header.
> - Good manners are required at all time. No personal attacks or 
flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the 
various
> resources on the homepage.
> 
> 
> 
> 
> Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/