Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: HELP! Problem with MIS carts

2003-12-04 by Johnny Eades

Hello Manuel,

It may not be the ink getting low, but the cartridge could have a 
buildup of foam so that when you filled the first refill and the ink 
flowed out the vent hole appearing to be full, it was really not 
full. The overflow was foam buildup. Every other refill I always use 
a large syringe and tape over the vent holes and draw out all the 
foam and ink inside the chamber before refilling.

Your friend in Photography,

Johnny Eades


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Manuel Toledo 
<mtoledo@e...> wrote:
> Hello,
> 
> I have a problem with a MIS cartridge that I am using with the UT 
> inkset. The ink monitor tells me that the inks are 80% full, but a 
> nozzle check shows no lines in the yellow position. I replaced the 
> cardritge with an Epson original and noticed that the MIS cartridge 
is 
> very light. All colors are fine with the Epson cartridge. I think 
that 
> in the MIS cartridge the yellow-position is empty and the others 
are 
> running low!
> 
> I refilled the cardridge a couple of weeks ago. Prior to that, when 
it 
> was in the printer, the ink monitor was showing about 10%-20% ink 
for 
> all colors, but I started to get bad nozzle checks that were 
getting 
> worse (fast) with cleaning.  Originally I thought that it was 
clocking. 
> However, before refilling I extracted the remaining ink from the 
> cartridge. There was very little of it. So I thought that it was 
just 
> that the sensors where not reliable and that my bad nozzle checks 
were 
> due to insufficent ink in the cartridge.
> 
> However, now the cartridge seems to be empty again! Only about two 
weeks 
> after reffiling the! During this time I think I have printed the 
> equivalent of perhaps  four 13x19in. pages only.
> 
> Can someone tell me if the capacity of these cartridges is this 
low? Or 
> perhaps the one I have is defective and should be replaced? I 
refilled 
> it once after filling it the first time.
> 
> Thanks in advance!
> 
> Your friend in photography,
> Manuel Toledo

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.