Digital BW, The Print

Instructions and slider positions are the same as I used as the MIS 
site.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@v...> wrote:
> I have some slider setting for glossy paper, UT2 & 1280 at 
> http://home1.gte.net/res09aij/UT2-Readme.htm .
> 
> Be sure the settings are as set out in that Readme file.
> 
> Let me know if MIS has different settings.
> 
> Paul
> www.PaulRoark.com 
> __________________________
> 
> -----Original Message-----
> From: rbehr2001 [mailto:rsbehr@h...] 
> Sent: Saturday, February 28, 2004 9:38 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Problem with UT2 / 1280
> 
> I recently installed a UT2 inkset in a new factory rebuilt Epson 
1280 
> printer. When I print using Slider Controls or curves, I get very 
> uneven distribution of densities at the light and dark ends of the 
> scale as measured with a X-RITE 810 densitometer;
> 
> Light		Density
> 0%		0.09
> 5%		0.11
> 10%		0.14
> 15%		0.18
> Dark		Density
> 85%		1.71
> 90%		2.05
> 95%		2.23
> 100%		2.24
> 
> Between 20-80% the distribution is relatively even. Using curves, 
the 
> distribution is even worse. I have reviewed the latest instructions 
> on the MIS website and I believe I'm following them pretty closely. 
> Any suggestions as to what the problem might be?
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other 
resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you 
wish to
> unsubscribe, please edit your Membership preferences by visiting 
this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages 
to keep
> them short.
> - Good manners are required at all time. No personal attacks or 
flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital 
B&W
> printing. Users who persistently make off-topic posts may be 
removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group 
Owner and
> Moderators. See "Group Topic, Rules and Guidelines" in the Files 
section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE 
PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE 
LIABLE TO YOU
> FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 
EXEMPLARY
> DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
> GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF 
THE  "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED 
OF THE
> POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE 
INABILITY
> TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED 
ACCESS TO OR
> ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR 
CONDUCT OF ANY
> THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY 
OTHER
> MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
>  
> Yahoo! Groups Links