Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

RE: [Digital BW] Problem with UT2 / 1280

2004-02-28 by Paul Roark

I'd re-check the settings and be sure there is no embedded profile in the
file that is being printed.

I don't have an easy way to check ink densities or positions.  It sounds
like the positions must be OK.  If not you'd have more serious problems.

What paper are you using?

Paul
_____________

-----Original Message-----
From: rbehr2001 [mailto:rsbehr@...] 
Sent: Saturday, February 28, 2004 2:45 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] Problem with UT2 / 1280

Instructions and slider positions are the same as I used as the MIS 
site.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@v...> wrote:
> I have some slider setting for glossy paper, UT2 & 1280 at 
> http://home1.gte.net/res09aij/UT2-Readme.htm .
> 
> Be sure the settings are as set out in that Readme file.
> 
> Let me know if MIS has different settings.
> 
> Paul
> www.PaulRoark.com 
> __________________________
> 
> -----Original Message-----
> From: rbehr2001 [mailto:rsbehr@h...] 
> Sent: Saturday, February 28, 2004 9:38 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Problem with UT2 / 1280
> 
> I recently installed a UT2 inkset in a new factory rebuilt Epson 
1280 
> printer. When I print using Slider Controls or curves, I get very 
> uneven distribution of densities at the light and dark ends of the 
> scale as measured with a X-RITE 810 densitometer;
> 
> Light		Density
> 0%		0.09
> 5%		0.11
> 10%		0.14
> 15%		0.18
> Dark		Density
> 85%		1.71
> 90%		2.05
> 95%		2.23
> 100%		2.24
> 
> Between 20-80% the distribution is relatively even. Using curves, 
the 
> distribution is even worse. I have reviewed the latest instructions 
> on the MIS website and I believe I'm following them pretty closely. 
> Any suggestions as to what the problem might be?
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other 
resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you 
wish to
> unsubscribe, please edit your Membership preferences by visiting 
this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages 
to keep
> them short.
> - Good manners are required at all time. No personal attacks or 
flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital 
B&W
> printing. Users who persistently make off-topic posts may be 
removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group 
Owner and
> Moderators. See "Group Topic, Rules and Guidelines" in the Files 
section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE 
PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE 
LIABLE TO YOU
> FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 
EXEMPLARY
> DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
> GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF 
THE  "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED 
OF THE
> POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE 
INABILITY
> TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED 
ACCESS TO OR
> ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR 
CONDUCT OF ANY
> THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY 
OTHER
> MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
>  
> Yahoo! Groups Links



Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
 
Yahoo! Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.