Digital BW, The Print

> Message: 18
>    Date: Thu, 18 Mar 2004 22:13:04 -0000
>    From: "Roy Harrington" <roy@...>
> Subject: Re: OT Upgrading OSX->10.3 and printing
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x"
> <px3n120x@y...> wrote:
>> I did an upgrade to OSX 10.3 and printing (SP 1280) is broken. What 
>> happens is
> that
>> when I chose Print I don't have all the options I used to on OSX 
>> 10.2, I can't choose
>> paper, dpi, etc. or QTR. I did a clean install but didn't help. I 
>> installed on a firewire
>> drive but I doubt installing on the Mac's hard drive would make a 
>> difference,
> basically
>> I want to make sure things work before I mess up with my current 
>> setup on the HD.
>> I'm searching the web for clues, any help would be appreciated.
>>
>> Andu
>
>
> Andu,
>
> OS X 10.3 has quite a few print drivers and it's likely you don't have 
> the one
> you are used to.   I'm not sure which one you really want.  The SP 
> 1280 is
> the standard Epson driver.  In Print Setup Utility when you Add a 
> printer
> make sure you use the "EPSON USB" pull down to find that driver.   If 
> you are
> going to also use QTR you'll need to use <option> Add and the Advanced
> pulldown.
>
> Roy
>

Also Epson just released new drivers for both the 1280 and 2200 for OSX.


[Non-text portions of this message have been removed]