Digital BW, The Print

I've seen that happen once too.  You are right that the set of options you
see is just the generic setup.  Its been a while so I don't remember the
exact circumstances, but I think it was a matter of restarting either the
program i.e. Quit and Restart Photoshop or possibly logging out and back in.
Deleting the printer and Re-Adding with no other programs running might
also help.

Roy

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x" <px3n120x@y...> 
wrote:
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, William John Smith 
> <william@g...> wrote:
> 
> I tried Epson's new driver for SP 1280 but no improvement. Same with GP, QTR. Here's 
> what I have in the bottom pull-down menu of the Print dialog:
> Copies & pages
> Layout
> Scheduler
> Paper handling
> Colorsync
> Summary
> which looks to me like a generic setup to which each printer adds its particular features.
> 
> I'm wondering if these options are part of a config file I can check and/or edit.
> 
> Andu
> 
> > 
> > 
> > > Message: 18
> > >    Date: Thu, 18 Mar 2004 22:13:04 -0000
> > >    From: "Roy Harrington" <roy@h...>
> > > Subject: Re: OT Upgrading OSX->10.3 and printing
> > >
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x"
> > > <px3n120x@y...> wrote:
> > >> I did an upgrade to OSX 10.3 and printing (SP 1280) is broken. What 
> > >> happens is
> > > that
> > >> when I chose Print I don't have all the options I used to on OSX 
> > >> 10.2, I can't choose
> > >> paper, dpi, etc. or QTR. I did a clean install but didn't help. I 
> > >> installed on a firewire
> > >> drive but I doubt installing on the Mac's hard drive would make a 
> > >> difference,
> > > basically
> > >> I want to make sure things work before I mess up with my current 
> > >> setup on the HD.
> > >> I'm searching the web for clues, any help would be appreciated.
> > >>
> > >> Andu
> > >
> > >
> > > Andu,
> > >
> > > OS X 10.3 has quite a few print drivers and it's likely you don't have 
> > > the one
> > > you are used to.   I'm not sure which one you really want.  The SP 
> > > 1280 is
> > > the standard Epson driver.  In Print Setup Utility when you Add a 
> > > printer
> > > make sure you use the "EPSON USB" pull down to find that driver.   If 
> > > you are
> > > going to also use QTR you'll need to use <option> Add and the Advanced
> > > pulldown.
> > >
> > > Roy
> > >
> > 
> > Also Epson just released new drivers for both the 1280 and 2200 for OSX.
> > 
> > 
> > [Non-text portions of this message have been removed]