Digital BW, The Print

A production sample of UT7 is supposed to be in the overnight to me today.

Bill, sorry to do this to you, but you'll have a new LK (now largely
neutralized) and new LM.

Inks (and everything, I suppose) are a moving target for me.  The delay was
due to both a mistake in my notes and my improving the no-slider printing,
especially on Arches Hot Press.  

Note that for those who like neutral and don't like sepia, the UT7 Y
position (designated as a custom mixing position, among other things) can
have the pure carbon LC put in it and the no-slider printing becomes dead
neutral on EEM.  

Paul
www.PaulRoark.com 

For UT2 information, curves, and settings see:
http://home1.gte.net/res09aij/

_____________________________

-----Original Message-----
From: Richard [mailto:richard@...-bulldog.com] 
Sent: Friday, March 19, 2004 11:40 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: RE: [Digital BW] RE: Attn Paul Roark: Confused about status of UT7
inkset



-----Original Message-----
From: Bill Schwab [mailto:wilschwab@...m] 
Sent: 19 March 2004 02:41
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] RE: Attn Paul Roark: Confused about status of UT7
inkset

I've been doing "beta testing" of the UT-7 inks on a
new 7600 for Paul and MIS and although there have been
some problems, I think the final mix is coming soon. I
have been VERY happy with my results thus far. All I
can say is be patient. Paul and MIS are very
meticulous and want to have the set correct before
wide release. I'm sure everyone will be pleased.
--------------------------------------------------
Well now, you might say that but I can remember exactly the same sentiments
coming out of the Piezo organisation nearly 12 months before the product hit
the streets.

Richard


---
[This E-mail has been scanned for viruses but it is your responsibility 
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]




Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See Group Topic, Rules and Guidelines in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND
MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  OWNER AND
MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
 
Yahoo! Groups Links