Daniel, >That seems to have helped just a little, but it's still noticable to >the naked eye. The media type is the usual way I cut back the ink load. (One advance in the 2200 is that there is what appears to be an ink load adjustment -- the "color density" slider in "Ink Config.") > T007-UPK is Photo K, yes? Yes. > Anything in the sliders I can play with to adjust the flow of black? I don't know. Try some things. >Is the Eboni curve supposed to turn off the black position? Yes, by having the Blue curve all the way to the top, the driver puts in only the other two inks. Because they are both quite dark, together they give a very good dmax on glossy papers. Good luck. Paul www.PaulRoark.com _______________________ --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@v...> wrote: > Daniel, > > It sounds like your printer is pouring on too much ink for some reason. Try > the "Photo Quality Glossy Film" media setting and see if that takes care of > the problem. This is the media setting for Ilford for the same reason. > > Paul > www.PaulRoark.com > __________________ > > -----Original Message----- > From: tronicart [mailto:tronicart@y...] > Sent: Friday, March 26, 2004 1:36 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] blotchy prints with UT2 on PSPP... HELP! > > Just started using UT2 inks with Photo K on my 1280 and have noticed > a bit of "pooling" or blotching of ink in the darkest shadows. It's > actually creating a kind of "banding" of heavy black ink in the dark > spots. All nozzels are clean and fireing properly, though. > > Not sure if I got the right black ink.. part number is ARC-T007- UPK. > Is this Photo K for UT2? > > Scanned the prints and put them here.. > http://www.tronicart.com/ink/ut2.htm > > I'm printing on PSPP with the UT2-PremSemiGloss-Neutral-1.acv curve > at 2880 and Photo Paper media seeting. Tried the Eboni curve aswell, > with same results. 1440 dpi produced extreemly blotchy prints. All > lighter shades seem to print fine. > > Any ideas? Thanks for the help > > Daniel Perez > > -oh, printing on EEM seems to come out fine. > > Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Re: blotchy prints with UT2 on PSPP...
2004-03-27 by Paul Roark
Attachments
- No local attachments were found for this message.