Digital BW, The Print

Richard, 

>... Would the UT1 inks work in an 1160 if two of the inks were removed?

The 1160 is one of the supported printers for UT1.  The inks are the same as
the hextone, but with no LC and LM.  The M & Y positions are also switched.
The toner goes in the yellow position.  The light gray (what would be in the
hextone yellow position) goes in the M spot.  

I have EEM and Epson UltraSmooth curves for the 1160 & UT1.

The 1160 is a good old workhorse.  I just retrieved mine from one of my
kids' rooms at set it up in my office again.  It is just the simplest
printer to use for ink development, among other things.

The 1160, however, cannot match the 1290 and 2100 quality.  The lack of a
light toner shows on very close inspection.  Also, the black ink does not
appear to be as smooth.  That said, for matte paper it's fine.  (If you want
to print glossy paper, get a 1290 or 2100 and UT2 or 7.)

Paul
www.PaulRoark.com 

For UT2 information, curves, and settings see:
http://home1.gte.net/res09aij/