Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] 1290 UT2 issues (dots on Semigloss)

2004-05-21 by Bernie Ess

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@v...> wrote:
> Bernie,
> 
> Which paper and curve are you using?

I tried out Epson premium semi- gloss, Ilford smooth pearl and a 
german semigloss paper I have been using before with success. All 
three paper with the described "snake skin" phenomenon in the darker 
grays.
 
The curve I applied was the "UT2-IlfordSmooth-Eboni-Neutral-1.acv". 
However I have to apply a correction curve which I lay over the image 
but under your printing curve, because the 1290 prints too dark in 
the deep shadows otherwise.

Meanwhile I can add the following: With the "UT2-IlfordSmooth-Eboni-
Carbon-1.acv" this phenomenon does *not* occur, only with the neutral 
curve. 

I have now started to experiment with the slider controls of the 
driver, and without adding your curves. The first results don't seem 
too bad, so maybe there is hope.

regards, Bernie

> 
> Paul
> www.PaulRoark.com 
> _________________________
> 
> -----Original Message-----
> From: Bernie Ess [mailto:albatros-@...] 
> Sent: Friday, May 21, 2004 5:33 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] 1290 UT2 issues (dots on Semigloss)
> 
> Hello, I have finally installed my new 1290 and a UT2 CFS. While on 
> matte papers the results are fine and on par with the results of 
> my former (but unfortunately broken) 1160 - all attempts to get a 
> satisfying print on semigloss paper failed so far.
> 
> I tried the curve workflow - mostly with the neutral curves) and 
what 
> I get is a nice print in the lighter and *very* dark shades, 
however 
> in the darker grey zones - like shaded zones of skin - I get a 
> relatively coarse black grain which looks a bit like "snake skin" - 
> dont know how to describe.
> 
> I also tried BO at 2880dpi, this dot/ grain phenomenon doesn't 
occur 
> there, however I can see the fine horizontal lines of the 
printhead - 
> its just not fine enough. 
> 
> SO basically I am unhappy - I bought the 1290 as an upgrade to my 
> broken 1160, however the 1160's results with UT1 on Semigloss were 
> clearly superior. Might it be a problem of the curves? Or does UT2 
> not work well with Semigloss papers? 
> 
> I hope I will get this working. 
> 
> Thanks, 
> 
> Bernie
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other 
resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you 
wish to
> unsubscribe, please edit your Membership preferences by visiting 
this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages 
to keep
> them short.
> - Good manners are required at all time. No personal attacks or 
flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital 
B&W
> printing. Users who persistently make off-topic posts may be 
removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group 
Owner and
> Moderators. See "Group Topic, Rules and Guidelines" in the Files 
section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE 
PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE 
LIABLE TO YOU
> FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 
EXEMPLARY
> DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
> GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF 
THE  "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED 
OF THE
> POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE 
INABILITY
> TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED 
ACCESS TO OR
> ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR 
CONDUCT OF ANY
> THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY 
OTHER
> MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
>  
> Yahoo! Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.