Digital BW, The Print

Stéphane,

>I'm not sure I fully understand the second part. 
>Do you mean I would be better off with a UT1 set instead of a UT2?

No, I like the UT2 much better than the UT1 inkset.  However, if you are
going to make a custom inkset with just one toner, then the UT1 quad toner
is the one that was made just for that purpose.  It is as light and weak
(low gamut) as possible and still be able to neutralize the 90% patch on
most papers.  So, the UT1 quad toner would show up the least in the
highlights, I think, and still be able to cool down the warm carbon inks in
the shadows.

Frankly, I'd recommend you just go with the standard UT2 inkset.

Hope this helps.

Paul
www.PaulRoark.com 

For UT2 & UT7 information, curves, and settings see:
http://home1.gte.net/res09aij/

_____________________


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roa=

rk@v...> 
wrote:
> >The problem is the 1290 has only 6 ink positions, so it is not possible =

to
> >have the full UT2 set with both Photo Black and Ebony Black, as is possi=

ble
> >in 2100.
> 
> The 1280 and 1290 with the standard UT2 setup can print on glossy or matt=

e
> paper when Eboni is installed.  With 2 dark grays, the dmax is about 5% l=

ess
> than the Photo K.  So, I don't think the Photo k is worth messing with.  =

On
> a paper like Ilford, with its great dmax, you'll probably never see the
> difference.
> 
> > My idea would be to use only the blue toner, not the light blue, ...
> >Is full tonality control possible with only the blue toner? Or would the=


> >light blue be a better option?
> 
> The UT2 cool gray inks are not the ones to use for this.  Use the single =

UT1
> toner (M position in hextones, Y position in UT1 quadtones).  On glossy
> paper up close, you might see some dots.
> 
> I think Roy uses a one-toner setup on his 7500 and gets very good results=

 on
> matte paper.
> 
> Good luck.
> 
> Paul
> www.PaulRoark.com 
> 
> For UT2 & UT7 information, curves, and settings see:
> http://home1.gte.net/res09aij/




Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See “Group Topic, Rules and Guidelines” in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND
“MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  “OWNER” AND
“MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
 
Yahoo! Groups Links