Digital BW, The Print

I finally got the combo running thanks to Roy's new instructions, BUT,
even though I set the paper size to Super B and my Photoshop image
size is 12.95x19.00, per the Epson driver setting, I only get about
1/4 of the image printed and it doesn't start in the right place -
it's nearly in the center, despite the fact that it only prints the
bottom right corner of the 30 Meg image. Tonality is nice and the
ability to vary it; microbanding is visible under a loupe. 

Below is a copy of the QTR file with the settings I used (with the
blend set for full warm tone).

___________________________________________________________
@color F0
@set PROMPT=$g

set FILE=%1%
set PRINTER=Quad2200

@: ************   Pick one of the following **************
@: set PAGE=Letter
@: set PAGE=Legal
@: set PAGE=Tabloid
set PAGE=SuperB
@: set PAGE=A3
@: set PAGE=A4
@: set PAGE=A5
@: set PAGE=A6
@: set PAGE=A7

set PAGE=SuperB

@: ************  Set Page Orientation  ***************
set ORIENTATION=portrait
@: set ORIENTATION=landscape


@: ************  Set Margin blank= centered **************
@:  basic margins are 1/8 inch all around
@:   TOP and LEFT are in addition to the 1/8 inch
@:  a blank sets centered mode

set TOP=
set LEFT=


@: ************  QuadToneRIP Curves, set both 1 & 2 *************

@:  Epson Enhanced Matte Profiles
set CURVE1=EEM_2200-warm
set CURVE1=EEM_2200-cool
@: set CURVE1=EEM_2200-coolSe
@: set CURVE1=EEM_2200-Sepia

@:  Oriental Fibre Profiles -- use Photo Black Ink
@: set CURVE1=OFB_2200-Sepia
@: set CURVE1=OFB_2200-cool
@: set CURVE1=OFB_2200-warm

@:  Premier Fine Art Profiles (also Hahnemuhle Papers)
@: set CURVE1=PFA_2200-Sepia
@: set CURVE1=PFA_2200-cool
@: set CURVE1=PFA_2200-warm

set CURVE1=EEM_2200-warm
set CURVE2=EEM_2200-cool


@: ************  Set Blending = percent of CURVE1  **************
set BLEND=100

@: ************ PRINTERHOST can be used to print through another
machine *******
set PRINTERHOST=

@: ************ SHARENAME if the printer has a different share name
enter here  ****
set SHARENAME=

@: **********this is the resolution, do not change***********
set RES=1440x720hq2

cmd /c "%ProgramFiles%\QuadToneRIP\bin\quadtoneprint"
pause
__________________________________________________________________