Digital BW, The Print

Ernst Dinkla wrote:
> gphilpott2003 wrote:
> 
>>Ernst,
>>I downloaded the Windows QTR beta 3 for the 9600 and there was a 
>>small typo in the print-9600.bat.  
>>The line:
>>set CURVE1=UC-EEnhMatte-warm-1set CURVE2=UC-EEnhMatte-coolSe-1
>>needs to be...
>>set CURVE1=UC-EEnhMatte-warm-1
>>set CURVE2=UC-EEnhMatte-coolSe-1
>>Once I separated these two lines, I had no further problems except 
>>for some vertical banding that I am trying to get rid of.
>>Hope this helps.
>>Greg 
> 
> 
> Greg,
> 
> I had seen that one and changed it but that didn't take out the 
> error I'm writing about.
> 
> W-QTR beta3, 9600, QTRgui, XP pro.
> 
> A friend with the same setup is printing after I advised him how 
> to set it up :-)  Wonder whether the 2200 setup with QTRgui that 
> I had installed before left something in registry or whereever.
> 
> Ernst

Well it is the "sharing" on the Epson driver that has to be 
renewed to get the path known to QTR etc. I had changed the name 
from Quad2200 to Quad9600 and the system has been restarted in 
between but that probably doesn't do it. Now I changed the name 
to something odd, apply button and then changed it back again to 
Quad9600, apply button and now it works again. Can't believe it 
that it was just that.

Ernst