Digital BW, The Print

Michael,
Are you on a Mac or a PC?
I can only make suggestions about QTR on the Mac.
Cheers,

John Toles
http://www.dragonflyprinting.com/
http://www.dragonflygallery.ca/

On Aug 22, 2004, at 2:57 PM, Michael B. Askew wrote:

> I've sent a question to Roy, but haven't heard back yet, so I
> thought I'd ask the group.  When I use QTR on the 7600, I can't get
> the top margin to be less than 9/16, and that doesn't leave room at
> the bottom required .55 in for the 7600 paper feed system to get a
> full 10" print.  Can anyone using a 7600 tell me how to get the top
> margin back to a true 1/4" from the top edge of the paper?
>
> Also, will it accept resolution greater than 1440x720 for enhanced
> matte paper?  Or super(x) microweave?  I'm getting finer resolution
> using the Epson driver with simply 1440 and super(x) microweave than
> with the QTR at this point.  The difference in resolution is visible
> to the naked eye, so it's a problem with me.  Would appreciate any
> guidance or corrective action suggestions.