Digital BW, The Print

I forgot to mention, I'm on a PC with Windows XP.  But I'd be 
interested to know if you have a similar issue with the 7600 driven 
from a Mac.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Dragonfly 
Imaging & Printing <dragonfly.printing@s...> wrote:
> Michael,
> Are you on a Mac or a PC?
> I can only make suggestions about QTR on the Mac.
> Cheers,
> 
> John Toles
> http://www.dragonflyprinting.com/
> http://www.dragonflygallery.ca/
> 
> On Aug 22, 2004, at 2:57 PM, Michael B. Askew wrote:
> 
> > I've sent a question to Roy, but haven't heard back yet, so I
> > thought I'd ask the group.  When I use QTR on the 7600, I can't 
get
> > the top margin to be less than 9/16, and that doesn't leave room 
at
> > the bottom required .55 in for the 7600 paper feed system to get 
a
> > full 10" print.  Can anyone using a 7600 tell me how to get the 
top
> > margin back to a true 1/4" from the top edge of the paper?
> >
> > Also, will it accept resolution greater than 1440x720 for 
enhanced
> > matte paper?  Or super(x) microweave?  I'm getting finer 
resolution
> > using the Epson driver with simply 1440 and super(x) microweave 
than
> > with the QTR at this point.  The difference in resolution is 
visible
> > to the naked eye, so it's a problem with me.  Would appreciate 
any
> > guidance or corrective action suggestions.