Digital BW, The Print

Hmm...I've been using PR308 in the sheet feeder (2200) with the selector set
to +.  Everything _seems_ to work as normal, but is that a problem perhaps?

Regards,

  --Ken Carney
    www.kencarney.com  

> -----Original Message-----
> From: Josh Freeman [mailto:quakewarning@...] 
> Sent: Sunday, September 05, 2004 11:53 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: Can I feed 380 gsm paper through 
> the top slot in the 2100?
> 
> Through the back. The 2200 I have recommends the manual feed 
> slot for velvet fine art which is a lowly 260gsm. So a 
> heavier 380 is way more.
> It's not that hard, after moving the lever, push the paper in 
> until you see a half inch or so and hold it against the right 
> edge of the slot. There is enough of an edge in there that 
> you can rock the paper and you can feel it when it is square. 
> Then while holding the paper raise the lever 2 notches and 
> you're ready.