Digital BW, The Print

Tom,

Yes, when using QTR I print using the parallel port on which the 
2200 is "shared."  I do not share the USB connection (I use the USB 
connection for non-QTR printing on the 2200.)  I am not on a network 
and do not use the loopback adapter.

Fred 

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Tom OConnell" 
<tomoc@y...> wrote:
> 
> Fred-
> 
> I assume you then print with the parallel port? and the USB 
> connection is just to "share" on the network or to print with the 
OEM 
> driver or other rip?
> 
> tom
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "fredila2" 
> <fred@f...> wrote:
> > 
> > Tom,
> > 
> > I don't know if this will help but...
> > 
> > I tried for two weeks to print using the 2200 shared, a USB 
> > connection, and the loopback adapter.  I messed with firewalls, 
> > settings, etc.  Yet I could not make it work and got the 
> > same "unable to write raster data to driver" message every time.
> > 
> > Stephen then suggested (after version .26) that I attach a 
parallel 
> > printer cable to the 2200 (in addition to the USB connection).  
I 
> > gave the parallel connection the "Quad2200" share name. I also 
> > disabled the loopback adapter.  I did all that today and finally 
> got 
> > it to work (with all the firewalls enabled.)  Thank 
goodness...and 
> > thanks Stephen.