Digital BW, The Print

James,

Thanks so much for this link!  I sure have needed it as I have been 
doing all my printing in 9.2 since installing OSX 10.3 a few months 
ago.  I could never get the printer utilities to open, never clean 
nozzles or check alignment.  I also can't figure out how to set the dpi 
on the printer.  Perhaps this software will fix my problem - I just got 
sick of trying to figure it out (nothing should be this convoluted for 
the consumer) and no one I talked to had any of the answers - sure 
didn't expect to see one on this list.  Hope this fix works would like 
to print out of 10.3 and quite having to restart in 9.2.  Sorry to all 
you PC people for having to put up with all of this!  Thanks again.

Roger Smith - E. Lansing, MI 48823

On Oct 14, 2004, at 2:50 PM, 
DigitalBlackandWhiteThePrint@yahoogroups.com wrote:

> Message: 25
>    Date: Thu, 14 Oct 2004 13:50:33 -0500
>    From: James Haney <jhaney@...>
> Subject: Re: please help - 2200 completely hosed with QTR and Epson
>
> John,
>
> I had the same problem, or at least very similar.
>
> In the end I deleted every printer, re-installed the drivers from
> Panther install disk 2, set up Epson printers in the printer setup
> utility, and ONLY THEN installed QTR.
>
> In my instance installing QTR before installing Epson drivers disabled
> the ability of the Printer Setup Utility from seeing USB attached
> printers using "Epson USB."
>
> Incidentally, I used the Printer Setup Utility Repair application:
>
> http://www.versiontracker.com/dyn/moreinfo/macosx/14641
>
> to actually do the driver deletion and permissions repair. I don't know
> if this is essential, but doing a permissions repair is absolutely
> essential to getting things working again.
>
> James Haney