Digital BW, The Print

John,

You can pull fluid down through the feed tube with a large syringe. On
the 9000, I prefer to push fluid down the line (with a syringe) from
the cartridge end, but it's a bit easier to get to on that printer...

Richard

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "john dean"
<deanwork2003@y...> wrote:
> 
>  Is there something that one can do to check if all the lines are
clean and not blocked 
> when doing a head replacement besides changing the dampers? I'm
facing it all this week.
> 
> john
> 
>  
> > I did finally find some mal aligment and got the gears to engage,
Yes you can 
> > power it up without the right side cover on. Anyway the service
error 
> > 0001000c Went away.
> > Now I have two dampers that will not fill, even after an init fill
and kk2's.
> > I left the cover off the head and damper assembley so I can see
whats going 
> > on. No ink in two of the dampers.
> > Steve M.
> > 
> > 
> > [Non-text portions of this message have been removed]