Digital BW, The Print

Yes I only do pano's this one is 13x 53.19 and that you for the tip. 
I am using photoshop7 with the latest epson driver from thier site, 
on XP and that is all. I wanted to try qtr but had to finish some 
prints I sold from a recent show. Wanted a clean break before I 
worked on trying new software. Since I have recieved this printer I 
have gone through 50 feet of paper no problem. Before I used a r800 
same set up , no problems. Then the MIS cartridge and then this. It 
is like the printer said, wow you got a lot left, forget it..You 
watch the print queu you can see it all spool to the printer, then 
start printing, then cancel and delete the file from the printer.


joey

I am using --- In 
DigitalBlackandWhiteThePrint@yahoogroups.com, "Michael Hung" 
<mhkhung@y...> wrote:
> 
> What software are you using to print? It's a 53 inch print so I 
assume
> it's a really big pano?
> 
> As for the bad MIS carts (I had them too), what you can do is find 
a
> old/empty OEM cart (matching position 007/009 of course), use a
> swiss-army-knife/screwdriver to swap the chips. Then use a utility
> called sscserve to reset the ink level to full.
> 
> http://www.ssclg.com/epsone.shtml
> 
> Michael
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "zimmracing"
> <zimmracing@y...> wrote:
> > 
> > 
> > Can someone help before I run back to the dark room, or at least 
to 
> > a printer that works all the time. Due to many of you here 
weither 
> > you know it or not I moved from the r800 to the 1280. I am 
running 
> > into a major issue today. When trying to run a print for a 
customer 
> > the printer deletes the job about 3 inches in to the 53 inch 
print. 
> > If I switch to fast BO printing then it run just fine. I tried 
both 
> > BO and color in the quality setting. I do not use a continus 
feed 
> > system as yet just MIS cartridges. The last carbon cartridge 
that I 
> > recieved from them did not ever register, meaning the ink light 
> > stayed on, so I went to factory Epson inks all around to try and 
get 
> > this print done. Then this started. I have removed and 
reinstalled 
> > the driver and am about to chuck this anchor out the window. 
Please 
> > someone help....