Pieris, You won't get very cold with the sliders. Start with the cool curve for the paper you're using (be sure you're driver is in the No Color Adjustment mode) and move the green curve up substantially. Then move the red curve down about an equal amount. The cyan ink is very cold, so with a proper curve I suspect it'll get plenty cold for you. Paul www.PaulRoark.com -----Original Message----- From: Pieris Berreitter [mailto:pieris@...] Sent: Saturday, December 18, 2004 11:31 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] Re: UT2 cold tones not very cold I received from Paul a scan of the nozzle test pattern with/without cold curves applied, and it matches exactly what I'm seeing. So I know my inks are good. I will work with the sliders to try to get a cooler tone. I'll let you know what I find. -Pieris --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Pieris Berreitter" <pieris@y...> wrote: > > I just yesterday got my 1280 with UT2 running. I tried both of > Roark's methods, sliders and curves, but was unable to get a decent > cool toned image. I printed a bit of the ink purging pattern and see > that, with automatic printer settings, all tones are easily > discernable. But when applying sliders or curves in Roark's workflow, > the first three bars look black, black, and black. > > Am I doing something wrong? I can scan the results if that would > facilitate troubleshooting. Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Re: UT2 cold tones not very cold
2004-12-18 by Paul Roark
Attachments
- No local attachments were found for this message.