Digital BW, The Print

C86 was printing fine with EEM.  I then switched to HRag 188 grm2 paper and at 
times it will only print (starting from the top edge of paper) part of the photo. It 
appears that it starts printing before the paper is in place and then the paper is pulled 
in position and it's printing on the paper.

 Print Preview settings are checked for centered.  I will stop for a while and run EEm 
paper through with the eject button, it will handle the HRag paper fine.  After a few 
sheets of the HRag paper the same thing happens.  I ran the alignment program and 
the same thing happens.

I am also pressing the HRag paper under some heavy books to see if the slight paper 
curl may be causing the problem.

By the way the EZ inks are great.  I been running the following ink position, from left 
to right, Eboni, Warm, Neutral, and Neutral with no Brightness or Contrast 
adjustment.  It's just very slightly warmer than Eboni "BO" printing.  

Thanks,

Martin