That's is New, on Wide format Printers ( using the Epson Driver or Rip that Uses the Epson Driver) they usually print short. Maybe Epson has put that right without telling any one. Forest John evanj1969 <evanj69@bellsouth.net> wrote: tonight i installed QTRgui version 2.1d. work very well and easy. in PS CS, using a bitches brew of UT (FSN), EZN, and Epson UltraChrome lite Cyan (MIS equivalent) in my yellow chamber, i have been able to achieve the best results i have in the two years i've been doing this. the PS curves where quite slow in getting me there. QTRgui got me to "almost" the same place (little less smooth in the highlights / little less control over specific densities .... 60-70-80%), in about 15 minuets. i spent DAYS on those PS curves! i didn't seem to have the problems with installation / printing that a lot here have. the only problem i continue to run into is this ..... when printing anything with the resolution set to 1440 super or below, it come out fine. when i select 2880 dpi. it ALWAYS stretches the image height (not width) to approximately double the height as the actual file. anyone had a similar problem? any thoughts as how to correct it? evanj Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See Group Topic, Rules and Guidelines in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups SponsorADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/ To unsubscribe from this group, send an email to: DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- ALL-NEW Yahoo! Messenger - all new features - even more fun! [Non-text portions of this message have been removed]
Message
Re: [Digital BW] QTRgui / 2880 dpi. ALWAYS stretches image height
2005-01-01 by John Edmunds
Attachments
- No local attachments were found for this message.