Try this site: http://www.colorbat.com/hex_converter.htm Also, if I remember correctly, ther is a PDF of the service manual somewhere on the site, but I couldn't locate it. Hope this helps. Peter --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "p5198" <rbollini@n...> wrote: > > The Inkjetgoodies CIS has performed like a champ on my 1280 for a > couple of years, but it does use a serious amount of ink when the > machine is turned on; the cleaning cycle is always at maximum. The > printer is now blinking alternate green and red lights, and I suspect > the ink pads may contain enough ink to trigger the stop-printing > sensor. I looked for the reset sequence in the "Files" section, but > couldn't find it. A reset might keep me printing while I order a 2200 > together with the new carts (thanks for the tip, Paul Roark) and > whatever I need to fill them. Can anyone give me the reset sequence > for the 1280? > Bob Bollini
Message
Re: resetting the 1280
2005-01-01 by zonepeter
Attachments
- No local attachments were found for this message.