John, How easy are they to cut? Can you just use an exacto or something and it cuts smoothly? No sticky residue? thanks, allan John Broski wrote: > Hello All, > > For over 5 years I've been mounting prints (conventional and inkjet) using a > cold-mounting tissue called 3M Positionable Mounting Adhesive. It's dirt > simple to use... place a sheet of the tissue on the mounting board, squeegee > it down with the included tool, and peel off the release paper. This leaves > a perfectly uniform coating of adhesive on the mount board. Position the > print (I have it pre-positioned and hinged with tape by this stage), and > protect the print with the release paper. (I use the same sheet I peeled > off in the previous step.) Squeegee again. Done! > > I've seen no bond failures, bubbling, discoloration, or other problems in > the hundreds of prints I've bonded this way. There is no odor. It works > for glossy and matte papers. (With matte, I'm careful not to let the > release paper slip around when squeegeeing.) PMA comes in rolls 50 feet > long by either 11, 16, or 24" wide. I use the 11" rolls... perfect for > letter-size prints or 11 by 14's. For 13 by 19 prints, I use a small PMA > filler strip butted up against a larger sheet of PMA on the mounting board, > and squeegee both together. I've never noticed any trace of a seam through > the print... the adhesive layer is very thin, and there's no gap or overlap > in the adhesive layer anyway, if you're careful. > > There is also an expensive hand-cranked "roller machine" available (instead > of a simple squeegee), but I've never tried it. (No need for it, in my > mind.) > > See the product at: > > http://www.3m.com/us/mfg_industrial/adhesives/framing/html/scotch568.jhtml > > I buy mine from Freestyle Photo in Los Angeles. They have good prices and > service. Current price is $35 for the 11" by 50 foot roll. > > http://www.freestylephoto.biz/sc_prod.php?cat_id=2314&pid=1963 > > I hope this helps! > > John B. > > > > > > Please visit the Group Homepage to check the Files, and other resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep them short. > - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. > - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. > - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See \ufffdGroup Topic, Rules and Guidelines\ufffd in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > > > -- Technical Projects Specialist Academic Computing Stanford University v - (650) 996-0546 f - (650) 725-4685
Message
Re: [Digital BW] Easy cold mounting of inkjet prints
2005-01-05 by Allan Chen
Attachments
- No local attachments were found for this message.