Digital BW, The Print

I'm assuming you have the Epson UltraChrome inks in the printer.
Are you using the profiles that start with "UC" -- they are the UltraChrome
profiles, the ones starting with "UT" or "UT7" are for the MIS UtraTone inks
which are very different.   If you did end loading the UT profiles instead
of UC's they are in the download under Profiles/2200-UC.

Roy


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ianjamesmiller" 
<ianjamesmiller@y...> wrote:
> 
> Thanks - I do have "same as source" selected in the print preview
> color management dialog.
> 
> Are most people's experience that it works 'right out of the box', or
> does it take tinkering?
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Shilesh Jani"
> <shilesh.jani@s...> wrote:
> > 
> > When I was helping my friend with this, I found that in "print with 
> > preview", you have to make sure that "same as source" is selected, 
> > otherwise you may be printing with more than one profile.
> > 
> > Good luck.
> > 
> > Shilesh
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ianjamesmiller" 
> > <ianjamesmiller@y...> wrote:
> > > 
> > > 
> > > I recently downloaded and installed QTR 2.1d for the mac and I'm
> > > having output problems.  The installation was seamless - the proper
> > > printer was added, etc, but the prints are (I think) wildly off 
> > color.
> > >  The cool curve produces a very blue print (almost like a 
> > cyanotype),
> > > the sepia is close (but washed out), and the warm looks very washed
> > > out.  I also downloaded and installed the soft proofs avail from 
> > carl
> > > schofield and the prints are not close to those colors.
> > > 
> > > I believe I am printing it correctly from photoshop - the print's
> > > color space is gamma 2.2, I use the same space as the original, etc.
> > > 
> > > I am using epson's enhanced matte and the curves made for that 
> > paper.
> > > 
> > > My monitor is calibrated.
> > > 
> > > Anyone have any suggestions?  I poked around a little to see if I
> > > could find a faq or troubleshooting guide, but I have not found 
> > one...
> > > 
> > > Thanks so much!