Digital BW, The Print

With 16² roll paper, in custom paper size, set the margins to .125 top,
left, and right, and .56 bottom- you¹ll be fine @15.75² width.

Regards,

Bill Morse
Digital Eye Editions
450 Harrison Ave. Studio 227
Boston, MA 02118
(617) 429-3298

http://digitaleyeeditions.com

on 1/11/05 6:47 PM, steveabrink wrote:

> 
> My margins on 16 in. roll paper came out to a max 15.35 in. width,
> and I need 15.6 in. to use pre-cut 16x20 in. mats!
> 
> Can someone tell me if/how to print as close to 16 in. width as
> possible?   I don't know what the prints margins are, and also using
> the custom paper size set-up...?
> 
> Thanks in advance!
> SteveB  
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Andrew Unger"
> <ungram@f...> wrote:
>> > 
>> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Stephen
>> > Billard" <stephenb@S...> wrote:
>>> > > QTR should be centering the image on the physical page if you
> check
>>> > > "Centered". Is this not what is happening?
>> > 
>> > My image on letter size was was just over 10" (255mm)x7.25"
>> > (185mm), landscape.  With center checked and to fit unchecked and
>> > image reduced to 96% the left margin was 13.5mm, the right was
>> > 9.5mm, top was 16.5mm and bottom was 13mm.  Using my eyeballing
>> > method proved different but no better.  After considering this I
>> > noticed that all sizes of paper share minimum margins of .125 on
> the 
>> > long side and .556 on the short side. This obviously must be taken
>> > into consideration in determining the maximum size of the image.
>> > 
>> > Andrew
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the membership
> without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from the
> membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner and
> Moderators. See “Group Topic, Rules and Guidelines” in the Files section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND
> “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
> FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
> DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL,
> USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  “OWNER” AND “MODERATORS” OF
> DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW,
> THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR
> TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE
> DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE
> DIGITAL BW, THE PRINT YAHOO GROUP.
> 
> 
> 
> 
> Yahoo! Groups Links
> * To visit your group on the web, go to:
> * http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/
> *  
> * To unsubscribe from this group, send an email to:
> * DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com
> <mailto:DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com?subject=Unsub
> scribe> 
> *  
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
> 




[Non-text portions of this message have been removed]