Hm. I've been running the CIS from MIS in my 1280, with the UT2 set for about 2 months now. No problems at all, and I only print every other day (I purposely hold off on printig so I can keep that schedule up). I had been using the UT2 carts in the printer for over a year befor that, no clogging as of yet. In fact, I haven' had any clogs at all taht required more than 2 cleanings to clear. allan scott_now_coming wrote: > > Jack, > > I think the problem that the 1280's have is that they are a dye ink > printer and the pigment inks don't work well in that printer after a > while. > > Send a post to Paul. He'll be able to answer that question, I'm sure. > > Scott > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "jnhugo" > <jacknadelle@h...> wrote: > >>I have not been following the group for the last few months so I >>don't know if this has been discussed but I am having nothing but >>trouble with a newer cis sysytem for the 1280 I purchased from MIS. >>Previously I had been using a CIS that had kind of a wand that >>suspended the tubing over the print head-for about a year trouble >>free. Because of a blocked black I replaced the whole system with a >>unit from MIS that has kind of a plastic bridge that holds the >>tubing over the head. Nothing but trouble- jets glogging yellow > > goes > >>out-black jams then they all reappear for a few prints and start >>disappearing again. I'm beginning to think over all that this is a >>really inferior system. Ay one else having problems with MIS cis? >>UT2 on a 1280. Already on a second set of carts in less than 5 >>months... >>Jack > > > > > > > > Please visit the Group Homepage to check the Files, and other resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep them short. > - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. > - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. > - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See \ufffdGroup Topic, Rules and Guidelines\ufffd in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > > > -- Technical Projects Specialist Academic Computing Stanford University v - (650) 996-0546 f - (650) 725-4685
Message
Re: [Digital BW] Re: 1280 CIS from mis
2005-01-20 by Allan Chen
Attachments
- No local attachments were found for this message.