Digital BW, The Print

What would the printer do if the wrong cart was installed?  Would the 
ink button/light go solid red?

The reason I'm asking is that I had either an incorrect or bad chip on a 
new MIS C86 refillable clear M cartridge.  Resetting the chip didn't 
help.  Didn't think of trying the cartridge in different slots until 
after I swapped out the chip with a new one.

Paul Roark wrote:

> The chips are specific to the slot.
> 
> Paul
> www.PaulRoark.com 
> 
> 
> 
> -----Original Message-----
> From: evanj1969 [mailto:evanj69@...] 
> Sent: Tuesday, January 25, 2005 1:11 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] chips in an Epson 2200 specific to that color ?
> 
> 
> 
> are the chips in an Epson 2200 specific to that color or "slot" in 
> the printer.
> 
> if i had different inks (UT7, FSN) loaded in the "correct" 
> cartridges, could i take out what would be the "yellow" cart (that 
> has gray in it), and put in an Epson Light Magenta (or any color) 
> cart in the yellow position WITHOUT changing the chip?
> 
> would changing the chip to a "yellow" chip be REQUIRED?