Digital BW, The Print

Whoops, double neg on my last post.  Actually wondering if anybody's
had problems _not_ using the bf adapter?
Thanks,
Jens


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "JensGerbitz"
<jensgerbitz@y...> wrote:
> 
> Thanks Lee.
> 
> Howard: make sure that when you order with MIS - and if you decide to
> order some bulk ink as well - that you don't order a whole bottle for
> each color position.  The salesperson I spoke with was helpful, but
> didn't point out that the CMY positions are all the same ink; as a
> result I bought 2 bottles of bulk ink too many.  I don't think that it
> was an attempt to sell me more than I need, just that he may have
> thought that they were all different.
> 
> One other question for the group: is the bottom fill adapter
> necessary?  Has anyone here not run into problems without using one?
> 
> Thanks again,
> Jens
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Lee Hiers"
> <aa4ga@h...> wrote:
> > On 1 Feb 2005 at 20:50, JensGerbitz wrote:
> > 
> > > My question relates to the MIS UT EZN (neutral) inks,
> > > namely, is there any difference in the tone of the inks
> > > that go into the C, M and Y slots?  It wasn't very clear
> > > on the MIS website that they are indeed different, but
> > > I'm guessing they are all different dilutions of K. 
> > 
> > For the EZN, there are two inks:  Eboni used in the K 
> > position, and the EZN, which is used in CMY positions.  
> > 
> > For EZW, there are two inks:  Eboni in K, and EZW used in 
> > CMY.
> > 
> > The chips that go in each position are different.  So, the 
> > carts are not interchangeable between CMY, but the inks 
> > are.
> > 
> 
> 
> > MIS has different product numbers for bulk inks for CMY for 
> > the EZN, but it is all the same ink.  Ditto for EZW.
> > 
> > HTH,
> > 
> > Lee
> > 
> > 
> > -- 
> > Lee Hiers, AA4GA
> > Cornelia, Georgia
> > 
> > "Have Dobro Will Travel"