Digital BW, The Print

You need to let the cartridge sit in the printer for awhile to let 
the air to settle.

Try it in a few hours.

That's why when re-filling the MIS carts, you need to use the adapter 
and a syringe to extract a little ink before installing them in the 
printer.

Then , you should get a good nozzle check on the first or second try.

Scott




--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Philip Glaser" 
<glaserp@s...> wrote:
> Hi, 
> 
>  
> 
> I recently purchased an Epson C86 and ordered an MIS Eboni Black 
cartridge.
> I think I screwed up the new ink cartridge in the charging phase by 
trying
> to charge it without the color cartridges present (I figured I 
wasn't going
> to print with them so why install them?). The printer didn't seem 
to react
> well to this and so I turned it off and installed the three color 
cartridges
> that come with the printer. Everything seemed to go fine from 
there, but
> when I print nothing comes out of the black cartridge. I replaced 
the MIS
> cartridge with the original Epson one and now the black prints. Any
> suggestions about what to do for the MIS cartridge to get it 
working?
> 
>  
> 
> Thanks.
> 
>  
> 
> --Phil
> 
>  
> 
> 
> 
> [Non-text portions of this message have been removed]