thanks Paul. Everything is working great now. --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@v...> wrote: > I just changed #7 to indicate that it is the Profiles list where you'll find > the new custom dot gain curve. After you select that, the "Preserve Color > Numbers" should be able to be checked. You have to select the new profile > before the box becomes active. > > Paul > www.PaulRoark.com > ___________________________ > > > -----Original Message----- > From: Marcus [mailto:marcus@l...] > Sent: Tuesday, February 08, 2005 2:42 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: Re: [Digital BW] For Paul/creating a gamma curve for soft proofing > > > > Great, that answers my biggest concern. Now I just need to know about this > one for step > # 7. > > Instructions read.....7. Now you are back at the image file you had > originally opened. Go > to View, Proof Setup, Custom. The new curve you made should be in the list, > probably at > the bottom –Select it. Then check "Preserve Color Numbers." The image on > the monitor > should then look like it did while you were making the curve. Hit OK. > > > My questions is, I am unable to check "preserve color number" because it is > grayed out. > Am I doing something wrong? Also, what should the intent be set > to...perceptual, > absolute colorimetric or one of the other? > > And for anyone that has not tried this profiling method, you should try it > because it is > saving me from buying an expensive calibration device and I am not waisting > paper any > more. THANK YOU PAUL FOR GIVING US THIS VALUABLE PIECE OF INFORMATION. > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" > <paul.roark@v...> > wrote: > > The procedure for profiling the monitor is at > > http://home1.gte.net/res09aij/Monitor-Profiling.htm . > > > > Marcus, I have not had time to look at the questions you asked. It does > not > > work with RGB files, however. I always edit my images in grayscale and > save > > them before converting to RGB for printing through a curve. > > > > Paul > > www.PaulRoark.com > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner and > Moderators. See "Group Topic, Rules and Guidelines" in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU > FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY > DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, > GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE > POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY > TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR > ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY > THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER > MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links
Message
Re: For Paul/creating a gamma curve for soft proofing
2005-02-10 by Marcus
Attachments
- No local attachments were found for this message.