Digital BW, The Print

On 3/9/05 8:51 AM, "Mr_Misty_44" sent the following verbage:

> 
> 
> This is just a short one. For those who are using Entrada 300g paper
> or other 300g paper with the 2200. Where do you set the paper lever.
> For paper or envelope. What is the heaviest paper used and if paper
> is OK for 300g what is the point at which one should switch to
> Envelope setting. And, by the way what is the third mark under
> neath the envelope setting which causes the paper light to blink?
> Thanks as always,
> John H

Hi John,

I use the envelope setting for all papers, align while it's on that setting,
using a scrap of the same paper thickness you intend to print with. The
third mark is the paper load setting, for feeding your paper thru the back,
where you should be loading for those thicknesses. I use the back feed for
all papers except plain paper used for nozzle checks.

Carolyn