Digital BW, The Print

I have small bubbles in each of my carts - I think you will get some forming
as you remove and put back the carts.  The question is how many.  I tip the
cart up and squeeze so that most of the bubbles roll into the filling
chamber.


> From: David Wroblewski <dawroblewski@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Mon, 21 Mar 2005 12:35:50 -0000
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] Is my cart defective?
> 
> 
> 
> --- Steve Kale <stevekale@b...> wrote:
>> I would check the spring on the output port. ...[snip]...
>> No air should be coming in through that port - only through
>> the small hole at the top of that chamber (under the silver
>> strip when shipped).
> 
> I wonder if that is the problem. When I squeeze near
> the output port, I can see bubbles form inside--but no ink
> leaks out. This does not happen on all the ez-fill carts
> I have, but it does happen on more than one, so I've thought
> it was normal.
> 
> I'm going to call MIS today and ask if they've seen this
> before.
> 
> -david
>