Ben, What I've occasionally had is a black line that is caused by "junk" (dried pigs, I assume) on the head deflecting one or more jets off to the side. I have always been able to cure this by cleaning the head with Windex that is on a folded paper towel or, best, a 1/2 inch strip of bias tape (available in the sewing sections of many stores, including Wal-Mart). (I'm looking at a package of Wrights Single Fold 1/2" bias tape.) Before I had the bias tape, I'd cut and fold a paper towel to about 1/2 inch. I soak the tape with Windex, turn off the printer, release the head by rotating the white gear at the left toward me, raise the head (for thick paper), lay the soaked tape in the channel over which the head travels, move the head over the tape, lower the head, grab ends of the tape, and pull it back and forth across the head. Then, of course, put the head back in its place the move the gear back to lock the head. This should knock and pigment build-up off the surface of the head. I also rinse the parking pads periodically with windex or "UC base" (4 parts H2O to 3 parts glycerin. MIS may sell this as "UC base." I mixed it for diluting UC inks. It has no binder in it, but the water and glycerin -- an excellent dispersant and humicant -- will clean the sponge nicely. I also use the UC base for printer storage. No binder or pigs should mean no clogging.) Once I've cleaned the heads and pads, one cleaning cycle usually has resulted in the errant line disappearing. Good luck. Paul www.PaulRoark.com > -----Original Message----- > From: ben_zlotkin [mailto:ben@...] > Sent: Saturday, April 02, 2005 11:50 AM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] Epson 1280 with MIS UT printing problem > > > > Im fairly new to this, so if this is a common problem that has been > covered - please just > point me in the right direction. > > Im printing with the MIS UTFSN cartrides (Matte Black) on an Epson 1280. > The paper is > Epson EM. > > The problem Im having is with images where one area has heavy deep black > shadows. > 'Below' these areas I am getting dark lines after the dark section(s). By > below, I mean the > section the print head covers after it has covered the dark section. It is > as if the black ink > flow (or another dark black) does not shut down as fas as it should. By > the time the print > head is back at the other side of the print and starting its next run, the > problem is gone > until the dark section is covered again. > > This is hard to explain - if someone knows what Im talking about, please > let me know. > Otherwise, I'll post an image on Monday. > > Thank youall for your time, Ben Z > > > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See "Group Topic, Rules and Guidelines" in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > >
Message
RE: [Digital BW] Epson 1280 with MIS UT printing problem
2005-04-03 by Paul Roark
Attachments
- No local attachments were found for this message.