Paul, MK (matte black) is the Epson ink for use with matte papers, It does not ship with the printer. The black that ships with the printer is PK (photo black) to be used with resin coated (RC) papers. UC inks are the Epson "Ultra Chrome" PIGMENT inks which are standard with the 2200. Epson MK is a warm black, and so is the Epson light black. So BO prints with MK will be warm (but very nice). The Ebony ink from MIS is a cool overall, and can appear warm depending on the paper (see Clayton's web site for details). I would suggest initially to load all Epson inks. Try the warm BO method and the share-ware QTR for a number of tones. If you are dissatisfied with them for any reason, then you can try other inks like UT7. I will tell you from experience that IF QTR does not work for you overall (i.e., contrast, punch, the inkjet b/w "look"), no amount of ink swapping will work any better. The differences in the print between QTR+UC and UT7 is relatively minor. So when you get a new 2200 printer, the default advice is to go with the Epson inks, play around with BO, QTR, and ask yourself if it is worth going the more complicated route. If you find BO is your preferred method, by all means go with MIS Ebony for a more neutral print. But if you find QTR prints (cool, cool-selenium, warm, sepia, and many combinations of two of the aforementioned) acceptable then you are better off staying with Epson inks. When you are playing around initially, use Epson Enhanced Matte paper exclusively. It is readily available and inexpesive to boot. Good luck. Shilesh --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Paul Prowse <paco@e...> wrote: > Clayton, > > Thanks for your post, I think I¹m sold on the 2200. A couple of questions > arise from your post, forgive a newbie on some of these but my head is > spinning from all of the info I have consumed over the past couple of weeks! > > Firstly you refer to Eboni instead of MK, is MK the ink that ships with the > Printer from Epson? And like wise are UC the inks that ship from Epson for > color? > > I didn't know about the rear feeder which will mean I can use heavy Rag > Paper which is a bonus - thanks for that! > > Could you let me know if I can swap the inks so say I brought a full set of > UT7 from MIS can I swap them around when I need to print color from the > Epson OEM's that ship with the printer and if so can you leave cartridges > out of the printer after you have started using them and they not dry up? > I'm guessing it's best not to do the above but I might (hope) be wrong. > > Finally I am interested in experimenting with QTR, do you use it and is it > good for the 2200? Can you tell me what set up(s) you have for your 2200. > > Many thanks > > Paul > > On 18/4/05 3:22 am, "Clayton Jones" <cj@c...> wrote: > > > > > Paul, > > > > Some other important things about the 2200: > > > > 1) It has individual carts for each ink. > > > > 2) The color inks are pigment. > > > > 3) It is made for pigments and there seems to be fewer reports of > > clogging problems. > > > > 4) It has a rear feeder for thicker papers. > > > > As for using Eboni instead of MK with the UC color inks - a number of > > people have mentioned doing it, and I haven't seen anyone say anything > > bad about it. > > > > I have one and it has been a very fine printer. It hardly ever clogs. > > I think a 2200 is a good investment. > > > > > > Regards, > > Clayton > > > > > > Info on black and white digital printing at > > http://www.cjcom.net/digiprnarts.htm > > > > > > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > > they are often being updated. > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or you wish to > > unsubscribe, please edit your Membership preferences by visiting this same > > page. > > > > Please follow these basic guidelines: > > - As threads develop, trim off excess portions of earlier messages to keep > > them short. > > - Good manners are required at all time. No personal attacks or flames. > > Hostile, aggressive or argumentative users may be removed from the membership > > without notice. > > - Keep your posts and threads related to the group topic of digital B&W > > printing. Users who persistently make off-topic posts may be removed from the > > membership. > > - By posting on this forum you agree to abide by the group rules and > > guidelines, and to abide by the actions and decisions of the group Owner and > > Moderators. See "Group Topic, Rules and Guidelines" in the Files section: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU > > FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY > > DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, > > USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF > > DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH > > DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, > > THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR > > TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE > > DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE > > DIGITAL BW, THE PRINT YAHOO GROUP. > > > > > > > > > > Yahoo! Groups Links > > * To visit your group on the web, go to: > > * http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/ > > * > > * To unsubscribe from this group, send an email to: > > * DigitalBlackandWhiteThePrint-unsubscribe@...m > > <mailto:DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com? subject=Unsub > > scribe> > > * > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > > <http://docs.yahoo.com/info/terms/> . > >
Message
[Digital BW] Re: Final info needed on Starter setup - Please Help!!
2005-04-18 by Shilesh Jani
Attachments
- No local attachments were found for this message.