These margin values are described by the PPD file. I believe that Roy has said that the Pro series of printers did not have the "Minimize Margins" capability. Guess he was wrong. Anyway, you could modify the PPD file. The ParamCustomPageSize lines are what needs changing. There are two numbers after the word "Points" which are the minimum and maximum size values. The units of these are "Points" which are 1/72 of an inch. -Stephen www.sbillard.org/Stephen > -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On > Behalf Of Ernst Dinkla > Sent: Friday, April 22, 2005 4:23 AM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] Roll margins was ....QTRgui roll print direction > > > > Stephen, > > With the Epson 9000 I have top and left margins of 3.2 mm in QTR. > Sometimes the left margin jumps to 14.1 mm. I guess that's > actually the > bottom margin as I need 17,3 mm page size extra for top to bottom > compared to the image. With the Epson driver I can get less > waste on the > bottom when I set the 9000 firmware to the minimum waste. How > well this > translates to other drivers isn't clear, the Wasatch SoftRip > takes other > margins as well. > > What could be the minimum paper waste with QTR in roll > printing on the > 9000 and the other printers of that generation? > > Regards, Ernst > > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > In low income neighborhoods, 84% do not own computers. > At Network for Good, help bridge the Digital Divide! > http://us.click.yahoo.com/S.QlOD/3MnJAA/Zx0JAA/ucIolB/TM > -------------------------------------------------------------- > ------~-> > > Please visit the Group Homepage to check the Files, and other > resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or > you wish to unsubscribe, please edit your Membership > preferences by visiting this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier > messages to keep them short. > - Good manners are required at all time. No personal attacks > or flames. Hostile, aggressive or argumentative users may be > removed from the membership without notice. > - Keep your posts and threads related to the group topic of > digital B&W printing. Users who persistently make off-topic > posts may be removed from the membership. > - By posting on this forum you agree to abide by the group > rules and guidelines, and to abide by the actions and > decisions of the group Owner and Moderators. See "Group > Topic, Rules and Guidelines" in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL > BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE > THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT > YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, > INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY > DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN > IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT > YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH > DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE > THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED > ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, > THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO > THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > > >
Message
RE: [Digital BW] Roll margins was ....QTRgui roll print direction
2005-04-22 by Stephen Billard
Attachments
- No local attachments were found for this message.