Digital BW, The Print

You got a great deal.  I too like the look of this printers BO output, I'm going to do a few 
images on HPR with eboni, as it has a very nice TRI-X look and stunning tonality.

The cartridge I received prefilled with UT-FS was provided in one of the new clear 
spongeless carts, so refilling it should be a breeze (kudos to MIS).  As I have a bit of Eboni 
left, I also ordered an empty black clear cartridge.  The cartridge was extremely easy to 
virgin fill, and use right away.  This is much more convenient than the old sponge style 
that needed 3-24 hours after filling for use.  After a clean nozzle check (3 cleaning cycles) 
I haven't had clogging or other issues.

CMCMY is the new ink position for UT FS/FSN monotone inksets using only CMY inks.  
Previously for the 6 inks printers, you would either need the PIezo/R9 driver, or use 5 
separate dilutions of ink in the CcMmY cartridge when printing with the Epson driver.  The 
current setup uses 3 inks in the cartridge's 5 positions in a CMCMY order; cyan ink in the 
cyan and magenta positions, magenta in light cyan and light magenta positions, and 
yellow in the yellow position.  With this setup, you can either print with the Epson driver, 
or utilize Paul Roark's curves for greater tonality.  These are not the UT2 curves, but 
curves specifically written for the Full Spectrum / Full Spectrum Neutral inks found on his 
website.  While the curves are written for the 1280, they work perfectly with the 900.

Eventually I am going to purcase a UT2 cartridge to test this printer with QTR (and Paul's 
curves), but my current need is for a monotone inkset - and I am completely pleased with 
this ink / printer combination. - So a big thanks to Paul is in order, as well as to MIS.

Don

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Jerry in Houston 
<glewis4457@y...> wrote:

> Thanks Don for your help ... I bought mine on ebay,
> refurb, for $69 + shipping and received it yesterday. 
> 
> I have not yet taken on installing the MIS UT2 CIS
> inks but it looks like a pretty simple install.  I am
> actually thinking about buying a couple of the new
> clear refillable carts, they are cheap enough, and
> just using the inks I have from the CIS and avoid all
> the tubing.
> 
> BTW, what is the CMCMY config?  and you say you use
> Pauls regular UT2 curves?  Sounds interesting,
> 
> Jerry in Houston