Digital BW, The Print

I'm also getting two QTR choices in the driver dialog for Print (PS CS2) after upgrading to 
Tiger from 10.3.9.  This is for both my 2200 and 4000 printers.  I removed and re-
installed QTR, but still two QTR items in the dialog.  Printing is fine from either so not a 
problem.

 Carl
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "tariqgibranstudio" 
<tariqgibranstudio@y...> wrote:
> Well, I can't get QTR working with my 9600 and Tiger.  Even after uninstalling QTR and 
re-
> installing QTR, I end up with two QuadTone Rip choices in the final print dialog box.  
> Choosing the first results in nothing happening.  I did an upgrade to Tiger, not a 
complete 
> fresh wipe of the drive.  
> 
> Tariq
> 
> Tariq
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@b...> 
> wrote:
> > Thanks.  Well here goes...
> > 
> > 
> > > From: Roger L Sopher <rlsopher@c...>
> > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Date: Sun, 01 May 2005 06:08:03 -0600
> > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Subject: Re: [Digital BW] QTR and Tiger
> > > 
> > > Steve Kale wrote:
> > > 
> > >> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
> > >> with the new H.264
> > >> video conferencing but not wanting QTR to go down....  :-)  )
> > >> 
> > >> 
> > >> 
> > > I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> > > problems with printing once that was done.
> > > 
> > > Roger
> > >