Digital BW, The Print

Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play with the new H.264 
video conferencing but not wanting QTR to go down....  :-)  )

Steve,

I by no means know what I am doing yet on QTR as I have only just  
brought an Epson 2100 and downloaded the RIP but I have Tiger (and  
trust me spotlight is worth the price to pay!! This does truly feel  
like an upgrade!) and I have tested QTR and on my 2100 through  
photoshop it prints.

Hope this helps!

Paul

On 1 May 2005, at 12:22, Steve Kale wrote:

> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to  
> play with the new H.264
> video conferencing but not wanting QTR to go down....  :-)  )
>
>
>
>
>
> Please visit the Group Homepage to check the Files, and other  
> resources as they are often being updated.
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> If you wish to receive no emails or just a daily digest, or you  
> wish to unsubscribe, please edit your Membership preferences by  
> visiting this same page.
>
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages  
> to keep them short.
> - Good manners are required at all time. No personal attacks or  
> flames. Hostile, aggressive or argumentative users may be removed  
> from the membership without notice.
> - Keep your posts and threads related to the group topic of digital  
> B&W printing. Users who persistently make off-topic posts may be  
> removed from the membership.
> - By posting on this forum you agree to abide by the group rules  
> and guidelines, and to abide by the actions and decisions of the  
> group Owner and Moderators. See �Group Topic, Rules and Guidelines�  
> in the Files section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE  
> PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE  
> �OWNER� AND �MODERATORS� OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL  
> NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
> CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO,  
> DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER  
> INTANGIBLE LOSSES (EVEN IF THE  �OWNER� AND �MODERATORS� OF DIGITAL  
> BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF  
> SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE  
> THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO  
> OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR  
> CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO  
> GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE  
> PRINT YAHOO GROUP.
>
>
>
> Yahoo! Groups Links
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/
>
> To unsubscribe from this group, send an email to:
> DigitalBlackandWhiteThePrint-unsubscribe@...m
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>



[Non-text portions of this message have been removed]

Steve Kale wrote:

> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play 
> with the new H.264
> video conferencing but not wanting QTR to go down....  :-)  )
>
>
>
I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no 
problems with printing once that was done.

Roger

-- 
_______________________

Roger L Sopher
rlsopher@...
http://deCorrales.com
_______________________



[Non-text portions of this message have been removed]

Thanks.  Well here goes...

> From: Roger L Sopher <rlsopher@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Sun, 01 May 2005 06:08:03 -0600
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] QTR and Tiger
> 
> Steve Kale wrote:
> 
>> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
>> with the new H.264
>> video conferencing but not wanting QTR to go down....  :-)  )
>> 
>> 
>> 
> I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> problems with printing once that was done.
> 
> Roger
>

Well, I can't get QTR working with my 9600 and Tiger.  Even after uninstalling QTR and re-
installing QTR, I end up with two QuadTone Rip choices in the final print dialog box.  
Choosing the first results in nothing happening.  I did an upgrade to Tiger, not a complete 
fresh wipe of the drive.  

Tariq

Tariq
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@b...> 
wrote:

> Thanks.  Well here goes...
> 
> 
> > From: Roger L Sopher <rlsopher@c...>
> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Date: Sun, 01 May 2005 06:08:03 -0600
> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Subject: Re: [Digital BW] QTR and Tiger
> > 
> > Steve Kale wrote:
> > 
> >> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
> >> with the new H.264
> >> video conferencing but not wanting QTR to go down....  :-)  )
> >> 
> >> 
> >> 
> > I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> > problems with printing once that was done.
> > 
> > Roger
> >

tariqgibranstudio wrote:

> Well, I can't get QTR working with my 9600 and Tiger.  Even after 
> uninstalling QTR and re-
> installing QTR, I end up with two QuadTone Rip choices in the final 
> print dialog box. 
> Choosing the first results in nothing happening.  I did an upgrade to 
> Tiger, not a complete
> fresh wipe of the drive. 
>
> Tariq
>
I use a 2200 so it isn't directly comparable. I did an archive and 
update installation of Tiger and the only thing that has been iffy so 
far has been virtual pc.

Roger

-- 
_______________________

Roger L Sopher
rlsopher@...
http://deCorrales.com
_______________________

I'm also getting two QTR choices in the driver dialog for Print (PS CS2) after upgrading to 
Tiger from 10.3.9.  This is for both my 2200 and 4000 printers.  I removed and re-
installed QTR, but still two QTR items in the dialog.  Printing is fine from either so not a 
problem.

 Carl
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "tariqgibranstudio" 
<tariqgibranstudio@y...> wrote:
> Well, I can't get QTR working with my 9600 and Tiger.  Even after uninstalling QTR and 
re-
> installing QTR, I end up with two QuadTone Rip choices in the final print dialog box.  
> Choosing the first results in nothing happening.  I did an upgrade to Tiger, not a 
complete 

> fresh wipe of the drive.  
> 
> Tariq
> 
> Tariq
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@b...> 
> wrote:
> > Thanks.  Well here goes...
> > 
> > 
> > > From: Roger L Sopher <rlsopher@c...>
> > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Date: Sun, 01 May 2005 06:08:03 -0600
> > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Subject: Re: [Digital BW] QTR and Tiger
> > > 
> > > Steve Kale wrote:
> > > 
> > >> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
> > >> with the new H.264
> > >> video conferencing but not wanting QTR to go down....  :-)  )
> > >> 
> > >> 
> > >> 
> > > I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> > > problems with printing once that was done.
> > > 
> > > Roger
> > >

I'll give it another try.  Thanks for your confirmation about the two QTR choices.

Tariq


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Carl Schofield" <scho@m...> 
wrote:
> I'm also getting two QTR choices in the driver dialog for Print (PS CS2) after upgrading to 
> Tiger from 10.3.9.  This is for both my 2200 and 4000 printers.  I removed and re-
> installed QTR, but still two QTR items in the dialog.  Printing is fine from either so not a 
> problem.
> 
>  Carl
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "tariqgibranstudio" 
> <tariqgibranstudio@y...> wrote:
> > Well, I can't get QTR working with my 9600 and Tiger.  Even after uninstalling QTR 
and 

> re-
> > installing QTR, I end up with two QuadTone Rip choices in the final print dialog box.  
> > Choosing the first results in nothing happening.  I did an upgrade to Tiger, not a 
> complete 
> > fresh wipe of the drive.  
> > 
> > Tariq
> > 
> > Tariq
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@b...> 
> > wrote:
> > > Thanks.  Well here goes...
> > > 
> > > 
> > > > From: Roger L Sopher <rlsopher@c...>
> > > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > Date: Sun, 01 May 2005 06:08:03 -0600
> > > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > Subject: Re: [Digital BW] QTR and Tiger
> > > > 
> > > > Steve Kale wrote:
> > > > 
> > > >> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
> > > >> with the new H.264
> > > >> video conferencing but not wanting QTR to go down....  :-)  )
> > > >> 
> > > >> 
> > > >> 
> > > > I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> > > > problems with printing once that was done.
> > > > 
> > > > Roger
> > > >

From what I've seen to far the duplicate dialogs are the only glitch
with Tiger.  There really is only one dialog plugin but Tiger is loading
it twice for some reason.  It appears that they are processed sequentially
so the second one ends up taking precedence.   If you save a Preset 
(saves the 2nd one) when you come back in it gets loaded into both.

Just use the second one only and it works fine.

Roy


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Carl Schofield" 
<scho@m...> wrote:
> I'm also getting two QTR choices in the driver dialog for Print (PS CS2) after 
upgrading to 
> Tiger from 10.3.9.  This is for both my 2200 and 4000 printers.  I removed and re-
> installed QTR, but still two QTR items in the dialog.  Printing is fine from either so 
not a 
> problem.
> 
>  Carl
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "tariqgibranstudio" 
> <tariqgibranstudio@y...> wrote:
> > Well, I can't get QTR working with my 9600 and Tiger.  Even after uninstalling 
QTR and 
> re-
> > installing QTR, I end up with two QuadTone Rip choices in the final print dialog 
box.  
> > Choosing the first results in nothing happening.  I did an upgrade to Tiger, not a 
> complete 
> > fresh wipe of the drive.  
> > 
> > Tariq
> > 
> > Tariq
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale 
<stevekale@b...> 

> > wrote:
> > > Thanks.  Well here goes...
> > > 
> > > 
> > > > From: Roger L Sopher <rlsopher@c...>
> > > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > Date: Sun, 01 May 2005 06:08:03 -0600
> > > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > Subject: Re: [Digital BW] QTR and Tiger
> > > > 
> > > > Steve Kale wrote:
> > > > 
> > > >> Has anyone tested QTR on Tiger?  Green light or red?  (Wanting to play
> > > >> with the new H.264
> > > >> video conferencing but not wanting QTR to go down....  :-)  )
> > > >> 
> > > >> 
> > > >> 
> > > > I upgraded my dual processor 867 G4 to Tiger. I had to reload QTR but no
> > > > problems with printing once that was done.
> > > > 
> > > > Roger
> > > >

Thanks very much Roy.  QTR is now working under Tiger.  Nothing to do
with QTR, just me re-naming Quad9600 to something else thus no curves
showed.  The Two dialogs are strange.  I bet 10.4.1 fixes this.  

Hope it also fixes the slow opening of small images in PHotoshop.  For
instance, on my Dual G4 1.25 in CS, a 2.9MB image takes less than 1
sec. to open  in 10.3.8 but takes 6 sec. to open in Tiger!  CS 2 is
coming today so I'll see if that makes a difference.  

Tariq


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington"
<roy@h...> wrote:
> 
> From what I've seen to far the duplicate dialogs are the only glitch
> with Tiger.  There really is only one dialog plugin but Tiger is loading
> it twice for some reason.  It appears that they are processed
sequentially
> so the second one ends up taking precedence.   If you save a Preset 
> (saves the 2nd one) when you come back in it gets loaded into both.
> 
> Just use the second one only and it works fine.
> 
> Roy
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Carl Schofield" 
> <scho@m...> wrote:
> > I'm also getting two QTR choices in the driver dialog for Print
(PS CS2) after 
> upgrading to 
> > Tiger from 10.3.9.  This is for both my 2200 and 4000 printers.  I
removed and re-
> > installed QTR, but still two QTR items in the dialog.  Printing is
fine from either so 
> not a 
> > problem.
> > 
> >  Carl
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com,
"tariqgibranstudio" 
> > <tariqgibranstudio@y...> wrote:
> > > Well, I can't get QTR working with my 9600 and Tiger.  Even
after uninstalling 
> QTR and 
> > re-
> > > installing QTR, I end up with two QuadTone Rip choices in the
final print dialog 
> box.  
> > > Choosing the first results in nothing happening.  I did an
upgrade to Tiger, not a 
> > complete 
> > > fresh wipe of the drive.  
> > > 
> > > Tariq
> > > 
> > > Tariq
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale 
> <stevekale@b...> 
> > > wrote:
> > > > Thanks.  Well here goes...
> > > > 
> > > > 
> > > > > From: Roger L Sopher <rlsopher@c...>
> > > > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > > Date: Sun, 01 May 2005 06:08:03 -0600
> > > > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > > > Subject: Re: [Digital BW] QTR and Tiger
> > > > > 
> > > > > Steve Kale wrote:
> > > > > 
> > > > >> Has anyone tested QTR on Tiger?  Green light or red? 
(Wanting to play
> > > > >> with the new H.264
> > > > >> video conferencing but not wanting QTR to go down....  :-)  )
> > > > >> 
> > > > >> 
> > > > >> 
> > > > > I upgraded my dual processor 867 G4 to Tiger. I had to
reload QTR but no

> > > > > problems with printing once that was done.
> > > > > 
> > > > > Roger
> > > > >