Digital BW, The Print

Mike, flush the epson inks with a flush cart. Install the new FS carts. Do
a clean cycle. Nozzle check. If ok fire away. If not do 4clean/wick cycles
(clean then park the head on the right for a couple of secs - this helps the
clean action), nozzle check. If bad, let sit for about 4 hours then repeat.
You will loose a lot in carts firing up a new system. Maybe you could get
some virgin empties from MIS plus some 4oz bottles and refill the carts.
Best of luck!
Julian
----- Original Message -----
From: "Mike Stone" <michaelstone@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, December 04, 2001 11:33 AM
Subject: [Digital BW] New ink new printer how long before I can use it ?


> Hello
>
> Todays deliveries included my repaired 1160, Epson had replaced both heads
> under warranty after terminal clogging from PiezographyBW inks. I also
> received a set of MIS FS cartridges.
>
> The question I ask those of you with more experience is: Should I let my
new
> carts sit a while before installing them and when I do install them should
I
> let the printer sit a while, run a cleaning cycle then let it sit before
> using it or just load up and fire away.
>
> The printer came back with epson carts installed and I have just done
nozzle
> and aligment checks and some test prints , all perfect.
>
> I'm itching to get started with the FS but don't want cock it up.
>
> Any advice gratefully received.
>
> Regards
>
> Mike Stone
>
> +44 (0)20 8365 7976
>
> michaelstone@...
>
> www.mikestonephotographer.com
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>