Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale 
<stevekale@b...> wrote:
> I've had a terrible time with small bubbles forming in the gap 
between the
> poppet valve and the foam.  "


Steve,

I had that same problem too. Then I realized I was skipping over a 
very important step of cart re-filling:

After filling the resovoir, leave the cart in the up-right position 
for 1 hour, And Then put the stopped in the resovior "fill hole".

That seemed to clear up the nozzle check problems with me.

I used to fill the cart, plug the hole, use the BFA, the try to print 
with the carts. Always had problems.

Scott