Digital BW, The Print

Jerry,

Are you sure that person was talking about the BW inks?

Please - I have _no_ extra information here that I am in some way hinting at
but can't say. I can't add anything because I know of no changes in
formulation. However, I am posting this because the only post I could see on
the Epson list referred to the Color Piezo and it's 'sometimes' problematic
yellow. (where 'sometimes' means, some people work fine with it, some do
not).

Nij

> -----Original Message-----
> From: meander@... [mailto:meander@...]
> >
> >A few months ago after reading lots of posts on here I decided to try
> >MIS VM inks with the very same Epson 1160. The results: no clogs.. no
> >banding.. no micro banding.... nice prints! I think my success with the
> >MIS inks and Epson driver <Pauls curves>  boils down to two things. (1)
> >The MIS inks are a lot less prone to clogging. (2) The Epson driver with
> >its error diffusion is a lot more forgiving.
> >
> >-Jeff Magidson
>
> FWIW, a well respected member of the ink jet community recently
> posted to the Epson List that Conetech are reformulating Piezo inks
> to cure the clogging, message available in the archive. Who knows,
> now that Mac OSX is based on Unix some enterprising programmers might
> team up with users to produce an affordable open RIP which will work
> with any ink set. Exciting times.
>
> I would also like to join Julian in thanking Mike and numerous others
> on this List for sharing their real world experience with ink jet
> printing.
>
> Jerry.