Digital BW, The Print

I had a persistent clog in my 7600 that would not go away.  So, I loaded
cleaning fluid into all the positions, did an "initial fill," and let it sit
for more than 2 weeks.

 

It appears to have worked.  I re-loaded UT7 and the nozzles are all perfect
again - not a single cleaning cycle was needed.

 

Hopefully this will last.  If not, it's time for new dampers.

 

At any rate, the point is that leaving the cleaning fluid loaded for a long
time seems to be able to dissolve through persistent clogs - as MIS had
suggested.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 



[Non-text portions of this message have been removed]