Roy, I tape hang matte prints behind an over matte, and then put them in a black metal frame with acrylic glazing. Aside from the static & dust on the acrylic, this is much easier than dry mounting. I saw some museum glass the other day that would help with reflections. However, it may be more sensitive than acrylic, and there still are some (greenish) reflections of lights. Paul www.PaulRoark.com > -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Roy > Sent: Wednesday, May 25, 2005 1:40 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: RE: [Digital BW] A bit OT. Mounting Prints - effect of heat on > inkjet print - any recommended books > > At 09:39 AM 5/25/2005, you wrote: > >Roy, > > > >I have measured test strips of MIS B&W inks before and after dry mounting > >and found no significant differences. I have the press set to 180 and > use > >Seal Archival mount. I leave the prints in the press for 1 minute, but > >usually have to do more than one press per print for large prints. I do > not > >press matte paper -- only sprayed Premium Semimatte. > > > >Paul > > > Thanks Paul > > What do you do for matte? > > > Roy > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See Group Topic, Rules and Guidelines in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND > MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > >
Message
RE: [Digital BW] A bit OT. Mounting Prints - effect of heat on inkjet print - any recommended books
2005-05-25 by Paul Roark
Attachments
- No local attachments were found for this message.