Digital BW, The Print

Scott,

I have all of 24 hours experience with QTR.  However, there are 
sliders on the interface that allow you to reduce or increase the 
amount of ink and to blend curves.  THere are only two curves 
available at this point for the 800: cool and sepia.  So, if you 
select cool in the left drop down menu and sepia in the right the 
slider lets you blend the two.

Steve--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Scott 
McLoughlin <scott@a...> wrote:
> Is there a "how to" guide on how to do this? 
> 
> Stephen Kobrin wrote:
> 
> >
> > Again, as others have noted, at 2800 much too much ink is laid 
down. 
> > Cutting the ink back to -46 and printing at 2800 produced the best
> > print of the lot.  Under a 4X loupe it is still a little 
bit "grainier"
> > than the UT2 print, but at a normal viewing distance it is hard 
to tell
> > the difference.  I want to reserve final judgment until I let the 
prints
> > set overnight. 
> >
> > I want to experiment further with blending the cool and sepia 
tones at
> > 2800 with various ink densities.