Digital BW, The Print

Yep I have - works OK on my main printer - not on the backup.

Julian
----- Original Message -----
From: "Daniel Perez" <tronicart@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, December 11, 2001 6:12 PM
Subject: Re: [Digital BW] Re: Cyan overspray (halo) on CIS<cross posted>


> Okay, I contacted No More Carts and they said this was
> the first case of overspray with MIS they had seen,
> but confirmed that this was a problem with Color Piezo
> inks(on 1270-2000's).  They also said this looked
> worse than what they had seen before.
>
> They suggested pulling the cart out and pushing it
> back in VERY firmly.  Though I had tried that already,
> I gave it a shot anyway.  I ran some cleaning cycles
> and let it sit overnight for good measure.
>
> I printed some bars this morning and saw some *slight*
> cyan overspray again, but far less than before.  I
> then set the +/0 switch (paper thickness)to 0 (as Hap
> suggested, thanks)and that seems to have done it!
> Very sharp, clean edges on EAM and was able to print a
> clean profile target. I'm pretty sure it wasn't the
> ink.
>
> My question is, can I print on 260gsm Museo with the
> +/0 switch set to 0?  Anyone tried this?
>
> Thanks for all the help!
> -daniel
>
>
> --- hapm <hapm@...> wrote:
> > Daniel,
> > This sounds like a problem I had a month or so back.
> >  I had a cyan
> > airbrush-like edge next to the top and left of each
> > image about a
> > 1/4" wide.  I hope your solution is as simple as
> > mine.  I had left
> > the paper thickness switch under the cover of my
> > 1270 on + for thick
> > paper.
> > Hap
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for all of
> your unique holiday gifts! Buy at http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>